Fit-Outs, Three-Phase Power & Certification
Walsall has always been a working town — retail through the centre, offices, workshops and industrial units on the estates around it. Commercial electrical work there has to fit around trading hours, tenants and deadlines. We are Wolverhampton based and a short run down the M6, which makes early starts and out-of-hours work practical rather than awkward.
Commercial jobs fail for practical reasons far more often than technical ones: the power goes off at the wrong time, the containment ends up where a shelving run was meant to go, or the certification arrives weeks after the tenant has moved in. On a Walsall shop unit or a workshop on one of the estates, that is the difference between a job that helped and a job that cost you trading days.
So the sequence matters. We walk the premises, agree what has to stay live and when, plan containment and distribution around how the space will actually be used, and programme the disruptive parts into evenings, early mornings or a closed day. Everything is tested and certified as it is completed rather than left to a scramble at the end.
Landlords, managing agents, tenants and owner-occupiers all get the same treatment: one electrician who is accountable for the job from the first walk-round to the certificate. Read the wider commercial electrician service, see everything we do as an electrician in Walsall, or start with EICR testing in Walsall if the premises need certifying. Get a free quote whenever you are ready.
From a single shop unit to a three-phase industrial supply — planned, installed, tested and certified.

New units, refits and change-of-use work: power layouts, LED lighting, data containment, tills, signage supplies and everything that has to be live before the doors open.

Machine supplies, isolators, containment, socket ring extensions and lighting for workshops and warehouse space on Walsall's trading estates — built to take knocks and to be worked on later.

Three-phase boards, sub-mains, distribution to new plant and load balancing across phases — including checking whether the existing supply will actually take what you are planning to add.

Periodic inspection and testing for commercial premises, coded and reported the same way as domestic work but scheduled around trading so circuits come down in a planned order.

LED upgrades, emergency lighting installation and testing, and structured cabling. Emergency lighting needs a monthly function test and an annual duration test to stay compliant — we can set that up and keep the log straight.
Planned around your trading, not around ours.
We look at the premises, the existing distribution and how the space is used before quoting anything.
A fixed price with a programme attached, including which parts happen out of hours and what stays live.
Containment first, then distribution and final circuits — kept clear of your operation as far as the job allows.
Tested and certified as sections complete, so the paperwork is in your hands when the work is.
Business premises in Walsall are covered here; the pages below cover domestic work in Walsall and commercial work in the neighbouring towns.
What Walsall business owners, landlords and agents ask us most.
Yes, and for most retail and office work that is the sensible option. Evenings, early mornings and closed days are all workable. We agree the disruptive stages up front so you know exactly when power is coming down and for how long.
Commonly every five years for standard commercial premises, but the interval is driven by the type of installation and how it is used — higher-risk environments are inspected more often. Your insurer, licence conditions or lease may set a shorter interval, so check those first.
It depends on the lease. Broadly, the landlord tends to hold the fixed installation and common parts while the tenant holds what they have installed inside the demise — but leases vary and we have seen it drawn both ways. We are happy to quote either party.
Yes. Emergency lighting requires a short monthly function test and a full annual duration test under the relevant British Standard. We can install, test and help you keep the log in order so it stands up when it is asked for.
Yes — workshops, warehousing and trade units around Bescot, Pleck and the estates out towards Darlaston and Willenhall, as well as retail and office space in the town centre.
Yes. Three-phase boards, sub-mains, machine supplies and load balancing across phases. If what you are adding will not fit within the existing supply, we will tell you that before the quote rather than after the job starts.
Real reviews from customers across Wolverhampton & the West Midlands. You deal directly with Adam, every time.
Can't complain about anything. I would highly recommend ATF for any electrical work.
Absolutely brilliant service. Adam was always approachable and available to speak to. Very knowledgeable and willing to answer all questions without hesitation. The only electrician that came out and did a test on a Sunday! Thank you Adam.
Absolutely fantastic service. Adam was on time, very professional, very knowledgeable and polite. Cannot fault his work and will definitely be using him again for any future work.
10 out of 10, really saved the day. Polite, positive and professional.
Last minute call-out. Prompt, courteous and explained what he was doing and why, every step of the way. Now using plug sockets that three other electricians couldn't fix. 10/10.
Adam is an excellent electrician — very reliable, professional, clean and tidy throughout his work. Arrived on time, very efficient. Highly recommended.
Very responsive and knowledgeable — diagnosed the fault, including tidying up wiring a previous company had left in a state. Went above and beyond to ensure the fault was diagnosed and rectified.
Adam fitted a new light to an inline fan in our bathroom. He came within an hour of my call and promptly sorted the issue. He was very polite and professional.
Really impressed by the level of service I received. I needed 2 sockets moving and called for a quote — I had a quote the same day and a clear outline of what would happen and when. Everything happened exactly as organised.
Couldn't recommend Adam enough — top class service from start to finish, making sure I was aware of what's going on at every stage of the full rewire he completed on my property. Will definitely be using ATF in the future!
Great service, didn't rip me off. Would definitely recommend.
Spot on service. Quick to get here, friendly and sorted us out to get us back up and running in no time!
Retail and offices through the town centre, workshops and warehousing on the estates towards Bescot, Pleck and Darlaston, and trade counters scattered in between — Walsall's commercial property is genuinely varied. What does not vary is the need to keep the place trading while the work happens, and to have the certification in hand at the end.
Free, no-obligation quotes for shops, offices, workshops and industrial units across Walsall.
All work is completed by qualified and certified electricians, with relevant approvals and documentation provided where required.

