Walsall's housing stock is mixed, and that is exactly why EICRs here are never one-size-fits-all. Older terraces and villas near the town centre often still carry rewirable fuse boards, rubber-sheathed cable or borrowed neutrals from decades of alterations. Post-war semis in the outer suburbs tend to be part-rewired rather than fully done. Newer estates and flats above shops usually test well but throw up bonding and RCD gaps. We inspect what is actually in front of us rather than working from a template.
An Electrical Installation Condition Report covers the consumer unit, every final circuit, the earthing and main protective bonding, and a sample of sockets, switches and lighting points. Anything we find is coded — C1 for danger present, C2 for potentially dangerous, C3 for improvement recommended, FI where further investigation is needed — and the installation is given an overall Satisfactory or Unsatisfactory outcome. That document is what a letting agent, a mortgage lender, an insurer or a buyer's solicitor will ask you for.
You deal with Adam directly from the first message to the finished certificate. No sales patter, no scare tactics, and no pressure to book remedial work with us afterwards. If you want the wider picture first, read the EICR service page or see everything we do as an electrician in Walsall. Business premises are covered by our commercial electrician in Walsall page, and you can get a free quote whenever you are ready.
Every circuit inspected, tested against the 18th Edition, coded and written up in language you can act on.
We open up the board, identify every circuit and look for the things that quietly go wrong over the years: loose terminations, mixed manufacturers' parts, missing circuit identification and boards that were already dated when they went in.
Main earthing and protective bonding to gas, water and any structural steel are traced and verified. In older Walsall properties this is the single most common thing we find missing, undersized or disconnected after building work.
A representative sample of accessories is opened and tested for polarity, correct connection, signs of heat damage and DIY alterations — including anything feeding a garage, outbuilding or converted loft.
RCDs and RCBOs are tested for real trip times, not just a button press. Where a board predates modern protection we say so plainly and explain what the shortfall means for the people living or working there.
You receive the full report with every observation coded and a clear Satisfactory or Unsatisfactory outcome — the document you hand to a tenant, an agent, an insurer or a buyer. We talk you through it rather than emailing a PDF and disappearing.
Four straightforward stages, from your first message to the certificate landing in your inbox.
Call, WhatsApp or use the estimator. Tell us the property type and rough age and we will quote without needing to visit first.
We agree a slot that suits the property — including around tenants, trading hours or a sale deadline.
We isolate circuit by circuit, inspect and test throughout, and keep the power off for as little time as possible.
The coded report and certificate follow, with a call to walk you through anything marked C1, C2 or FI.
Need something other than an inspection in Walsall? The same electrician covers the rest, and the neighbouring towns get the same EICR service.
The questions Walsall landlords, homeowners and business owners ask us most.
It depends on the number of circuits and consumer units rather than the postcode. A small flat with one board is quick; a three-storey house with an outbuilding supply is not. Tell us the property type and rough size and we will give you a fixed figure up front with nothing added afterwards. Ask for a free quote.
Yes. Under the Electrical Safety Standards in the Private Rented Sector (England) Regulations, privately rented homes in England must have a valid EICR carried out at least every five years, with a copy supplied to tenants and to the local authority on request. Walsall Council enforces this like any other English council.
Most domestic EICRs run between two and four hours. Larger properties, multiple boards or commercial premises take longer. We will tell you the realistic window when you book so you can plan around the power being off in stages.
C1 means danger is present and needs attention immediately. C2 means potentially dangerous — it has to be put right for the report to pass. C3 is improvement recommended and does not fail the installation. FI means something needs further investigation. Any C1 or C2 makes the overall result Unsatisfactory.
The town centre and the surrounding WS postcodes — Caldmore, Palfrey, Pleck, Bescot, Bloxwich and out towards Darlaston and Willenhall. We are based in Wolverhampton, so most of Walsall is a short run for us and same-day response is realistic.
No, and we will never imply otherwise. You get the coded report either way. If you do want the remedial work quoted, we will price only what the codes require and separate out anything that is genuinely optional.
Real reviews from customers across Wolverhampton & the West Midlands. You deal directly with Adam, every time.
Adam visited our property to carry out the EICR inspection. He was very friendly, professional, and punctual. Overall, it was a very smooth and positive experience. I would definitely recommend Adam to anyone looking for a reliable and professional electrician.
Adam carried out an EICR on our property and I was really impressed with his service. Communication was excellent from start to finish, he was transparent with pricing, and provided a clear breakdown of any issues.
Emergency call-out due to an alarm fault. Adam was great, very friendly and helpful. Took his details so I can use him directly next time.
Adam was very professional, friendly, knowledgeable and polite. Changed the old fuse box to a brand new one. I would recommend his service to anyone — definitely will be using him again for any future work.
Adam fitted a new light to an inline fan in our bathroom. He came within an hour of my call and promptly sorted the issue. He was very polite and professional.
Very helpful, quick and efficient — would book again for sure.
Adam is an excellent electrician — very reliable, professional, clean and tidy throughout his work. Arrived on time, very efficient. Highly recommended.
I would recommend his services to anyone who needs an electrician.
Absolutely fantastic service. Adam was on time, very professional, very knowledgeable and polite. Cannot fault his work and will definitely be using him again for any future work.
ATF Electrics came out to fix our CCTV system that had 2 out of 4 cameras not working. After about 20 minutes he had located the wiring and fixed the issue. Quick job but saved me hundreds. So grateful for the help — will recommend to all my friends and family.
Very professional and friendly.
Adam came straight away when he heard about our electric faults. He fixed all our problems, was professional, honest and got the job done. I would recommend his services to anyone who needs an electrician.
Walsall is a big, mixed town and the wiring reflects it — older properties around the Arboretum and Caldmore, industrial and trade units towards Bescot and Pleck, family housing out through Bloxwich. Wherever you are in the WS postcodes, the inspection is the same: every circuit tested, every finding coded, no guesswork.
A free, no-obligation quote for an EICR in Walsall — landlord, homeowner or commercial.
All work is completed by qualified and certified electricians, with relevant approvals and documentation provided where required.
