When Somebody Else Lives With The Board
The person standing in front of a tripped board at half past ten at night is very rarely the person who chose it. Willenhall has a lot of let property — terraced houses, flats above shops, converted upper floors — and in all of it the consumer unit has to be usable by whoever is in the building tonight, not just by the electrician who fitted it. That changes what a good upgrade looks like: fewer things going off at once, a board somebody can actually reach, and paperwork that answers the question before it is asked.
In an owner-occupied house a nuisance trip is an annoyance. In a let property it is a phone call, a journey and an invoice, and it tends to happen more than once because nothing has actually been fixed. The pattern is familiar: an older arrangement where one protective device covers a group of circuits, a tenant who resets it, and a fault that comes back a fortnight later. Replacing the unit with one that protects each circuit separately does two useful things at once. The trip stops taking half the property with it, and the board tells you which circuit is at fault instead of leaving everyone guessing.
Position matters more than people expect here as well. Boards in converted properties end up on shared landings, inside meter cupboards or in a hallway that belongs to somebody else, and a tenant who cannot get to the unit has no option but to ring. Where the board can sensibly be moved into the demise it serves, that is usually money well spent; where it cannot, clear identification and a legible schedule inside the cover at least means the right thing gets switched. We will tell you which of those applies once we have seen it.
The paperwork side is straightforward and worth getting right first time. Read the wider fuse board replacement service, book an EICR in Willenhall if the property needs its report renewing, see everything we cover as an electrician in Willenhall, look at EV charger installation in Willenhall or a house rewire in Willenhall, or ask for a free quote.
What changes when the property is tenanted, converted, or both at the same time.

Repeat visits for the same reset are the clearest sign that shared protection is hiding a fault. We find the cause first, then fit a unit that confines the next one to a single circuit, which is what actually reduces the phone calls.

Meter cupboards, shared landings and hallways that belong to another flat all make a unit hard to reach. Where the board can be relocated into the property it serves we will price it; where it cannot, we make sure it is unmistakably identified.

A void is the easiest window there is, and the supply being off for the day bothers nobody. Where the property is occupied we agree the window with the tenant in advance so it is arranged rather than sprung on them.

You get the Electrical Installation Certificate for the board change with the results for every circuit. Alongside a current inspection report it is the pair of documents that answers almost every question that gets asked about a let property.

Where several properties need the same work we will sequence it sensibly rather than treating each one as an unrelated job, and keep the documentation consistent across them so it is all in the same format when it is needed.
Four stages, arranged around the fact that somebody may be living in the property throughout.
What has been tripping, how often somebody has been called out and what any existing report says about the unit.
Board type and position, access, earthing and bonding, and the condition of the circuits that will be reconnected to a new unit.
A window agreed with you and, where the property is occupied, with the tenant — ideally in a void if there is one coming.
Unit fitted, every circuit reconnected and identified, full testing, certificate issued and the work notified through NAPIT.
Fuse boards, inspections, rewires and chargers all get done by the same electrician in Willenhall; the towns either side get the same fuse board service.
What landlords, agents and homeowners ask us across WV12 and WV13.
Yes, and most of it is. The supply is off for a good part of the working day, so we agree the window with you and the tenant beforehand and have the power back on before we leave. A void period is easier if one is coming up soon.
It stops one fault taking out several circuits, which is what turns a small problem into a panicked phone call. It does not repair an underlying fault, so we find that first. Done in that order, the call-outs generally do stop.
Sometimes. It depends on the supply arrangement and where the circuits run. If it can be brought inside the property it serves we will price that; if not, we make sure the unit is labelled well enough that the right switch gets used.
An Electrical Installation Certificate covering the board change, with the test results for every circuit and a schedule of what is on each way. Held alongside a current inspection report, that is what agents and local authorities expect to see.
Yes. If you have a few that need the same work we will plan them in an order that suits access and keep the certificates in the same format, which makes them far easier to hand over later.
Yes, under our NAPIT registration through the Competent Person Scheme. You do not need to submit anything yourself, and the certificate comes to you regardless of whether the property is let or owner-occupied.
Real reviews from customers across Wolverhampton & the West Midlands. You deal directly with Adam, every time.
Asked for an emergency call-out on a Sunday afternoon — Adam did not hesitate and came in less than an hour. Found the fault instantly and laid out our options. Very polite, and didn't insist on what should be done — he let us decide.
Adam fitted a new light to an inline fan in our bathroom. He came within an hour of my call and promptly sorted the issue. He was very polite and professional.
Adam is a true professional — nothing was too much trouble to make sure my requirements for installing my new fire were met. He installed a connection from a spur and did a top job. 5 star service, would definitely recommend.
He was very prompt in fitting me in. Polite and helpful, and the price was cheaper than expected. Definitely recommended.
Amazing service — helped me with an electrical issue during the evening. Friendly service and fixed the issue quickly. I would definitely recommend to all my friends and family.
Fitted a new plug for me after another company who had fitted my appliance caused water to leak into the old wall plug. He arrived within half an hour of being called and completed the job in no time.
Adam had a flexible approach and wasn't fazed when the wiring wasn't as expected (the house is old and weird). He found the most effective way to fix the issue and make the system safe, with the absolute minimum of necessary damage.
Very polite and very professional. Nothing was too much trouble and no mess was left. Would use them again — recommended.
I would recommend his services to anyone who needs an electrician.
ATF Electrics came out to fix our CCTV system that had 2 out of 4 cameras not working. After about 20 minutes he had located the wiring and fixed the issue. Quick job but saved me hundreds. So grateful for the help — will recommend to all my friends and family.
Came to me to check the electrics and make sure all is safe in a shed I built in the garden. Did a very thorough job! Very friendly and professional.
Excellent service from Adam at ATF Electrics. Excellent communication from start to finish and a quick turnaround on the job. Adam was a great guy, friendly and efficient — we would definitely recommend and use again.
Willenhall has terraced streets near the centre, later estates around them and a fair amount of upper-floor and converted accommodation, much of it rented. A fuse box replacement in Willenhall often has to suit a tenant, an agent and an owner at the same time, which is mostly a question of planning it properly.
A free, no-obligation quote for a consumer unit upgrade in Willenhall — owner-occupied, tenanted or somewhere in between.
All work is completed by qualified and certified electricians, with relevant approvals and documentation provided where required.

