People picture a rewire as the cable inside the walls, and most of the labour genuinely is that. But the parts that decide whether the finished installation is actually safe sit at the supply end: the main earthing conductor, the protective bonding to the incoming gas and water, the tails between the cutout and the board, and the board itself. In older Sedgley property those are regularly still the original items, sized for an installation that no longer exists. Renewing them belongs in the scope from day one, not as a line item discovered halfway through.
Above ground the ridge housing varies enormously. Property around the village can come with cellars, solid ground floors and thick walls; the later estate housing out towards Gornal is timber-floored and far easier to run cable through. That is why nothing here gets quoted off a photograph. An EICR in Sedgley tells us the condition of the existing circuits and, just as usefully, what the earthing arrangement actually is — which now and then changes the shape of a rewire more than anything found upstairs.
You get Adam on site from the first visit through to the certificate, and a written scope that includes the supply end rather than assuming somebody else dealt with it. Read the wider house rewire service, see what else we cover as an electrician in Sedgley, look at the board on its own under fuse board replacement, add EV charger installation in Sedgley, or ask for a free quote.
Everything a rewire has to take in, from the incoming supply through to the last light switch.
The main earthing conductor is the least visible part of an installation and one of the most important. We confirm what the earthing arrangement is, check the conductor is adequate for it and upgrade it where it is not — because everything downstream relies on that one cable doing its job.
Main protective bonding ties the incoming metallic services to the earthing system so everything sits at the same potential during a fault. It is frequently missing, undersized or connected on the wrong side of a meter in older property. Installing it properly is far easier while floors are already up.
Meter tails, the main switch and the consumer unit are replaced as one piece of work rather than piecemeal. The new board gives each circuit its own RCBO, so a fault on one takes out one, and surge protection can be included where it makes sense for the property.
A cellar is an advantage — it gives clear access to the underside of the ground floor and makes a difficult rewire straightforward. Solid floors are the opposite, and where we meet them the circuits go up and over instead, planned at survey rather than improvised on the day.
The full schedule of test results goes with the Electrical Installation Certificate, covering the new circuits and the supply end alike. The work is notified to building control through our NAPIT registration, so nothing is left sitting on your to-do list at the end of it.
Four stages that start at the cutout and work inwards, so nothing at the supply end comes as a late surprise.
We begin at the incoming supply — earthing arrangement, bonding, tails, board — and only then look at the circuits and the routes through the house.
Written and itemised, honest about the supply end, so there is no mid-job conversation about work that was always going to be necessary.
Circuits run through cellars, floor voids and lofts wherever the building allows, chased only where it does not, with bonding installed while the floors are open.
New board fitted, everything terminated and tested, results recorded, and the installation notified to building control through NAPIT.
A rewire is often the point where a fuse board, an EICR or an EV charger gets talked about too. Those pages for Sedgley are below, along with rewires in the towns next door.
What DY3 homeowners ask once they realise a rewire is not only about cable.
Yes. There is no sense running new circuits back to an old board, so a full rewire always ends with a new consumer unit, new tails and the earthing and bonding brought up to standard. If the board is the only thing you need, that is a separate job and we price it as one.
It is the green and yellow cable that connects the incoming gas and water pipework to the earthing system, so that during a fault everything metallic in the house sits at the same potential rather than at different ones. In older property it is often missing or too small, and a rewire is the natural time to put that right.
No. Where the ground floor is solid we route around it — up into the first-floor void and back down, or along a chase at a sensible height. It takes more planning, which is why we look at the floor construction at the survey rather than on the first morning.
It helps a great deal. A cellar gives open access to the underside of the ground floor, so circuits can be run and later maintained without lifting boards. It usually makes an older Sedgley house easier to rewire than a comparable one without one.
It can. Where budget or occupancy makes it sensible we agree a sequence — commonly the supply end and one floor first, the rest later — with the installation left safe and certified at each stage. We put the split in writing so nothing is left half done.
All of DY3, including the village and High Street area, Upper Gornal and out towards Coseley and the Wolverhampton side of the ridge. We are Wolverhampton based, so it is a short run over the top for a site visit.
Real reviews from customers across Wolverhampton & the West Midlands. You deal directly with Adam, every time.
Couldn't recommend Adam enough — top class service from start to finish, making sure I was aware of what's going on at every stage of the full rewire he completed on my property. Will definitely be using ATF in the future!
Adam came straight away when he heard about our electric faults. He fixed all our problems, was professional, honest and got the job done. I would recommend his services to anyone who needs an electrician.
Adam has installed a few sockets and new downlighters for us. Very quick, and kept the place nice and tidy. Definitely recommend him.
Emergency call-out due to an alarm fault. Adam was great, very friendly and helpful. Took his details so I can use him directly next time.
Had a problem on a Sunday morning — by Sunday afternoon it was sorted. Found the problem straight away. Polite and well mannered, would certainly recommend him to anyone.
I would recommend his services to anyone who needs an electrician.
Fantastic work, clean and tidy, understood exactly what I wanted. Well recommended.
Came out last minute on a Sunday evening to sort my broken shower out. Polite, great communication and above all professional. 10/10, will be using again!
Very responsive and knowledgeable — diagnosed the fault, including tidying up wiring a previous company had left in a state. Went above and beyond to ensure the fault was diagnosed and rectified.
Absolutely fantastic service. Adam was on time, very professional, very knowledgeable and polite. Cannot fault his work and will definitely be using him again for any future work.
10 out of 10, really saved the day. Polite, positive and professional.
Last minute call-out. Prompt, courteous and explained what he was doing and why, every step of the way. Now using plug sockets that three other electricians couldn't fix. 10/10.
Sedgley sits on the ridge between Wolverhampton and Dudley, with older property around the village and a great deal of post-war housing spreading out from it. The construction varies street by street, so every rewire here is scoped on the building in front of us — supply end included.
A free, no-obligation quote for a full or partial rewire in Sedgley — including earthing, bonding and a new board.
All work is completed by qualified and certified electricians, with relevant approvals and documentation provided where required.
